- Elevators[1]
- Other Generators[1]
- Other Special Purpose Bags & Cases[1]
- Industrial Humidifier[1]
- Other Construction Material Making Machinery[1]
- Pipe Making Machinery[1]
- Tile Making Machinery[1]
- Cranes[1]
- Forklifts[6]
- Hand Carts & Trolleys[7]
- Other Material Handling Equipment[1]
- Pallet Jack[3]
- Plastic Extruders[1]
- Industrial Chiller[4]
- Other Textile Machinery[4]
- Textile Finishing Machinery[1]
- Weaving Machinery[8]
- Textile Machinery Parts[20]
Warp weaving Beam Micro-chip Controlled Storage Chambers
1. Storage Layer- Two, Four, Six Layers
2. Storage Capacity- 26 ~ 120pcs
3.Diameter of Warp Beam or Batched Roll:- Dia 500-125
Our products can be selected from a variety of types, depending on the customer's application for workroom space. It not only can be installed on th ground, but also can be embedded under the ground. Our warehousing type beam stacker have many types including single exit, single exit digging type, double exit, double exit digging type, a two-story type to load from the second floor and unload from the first, and so on.
Storage Layer: Two, Four, Six Layers
Storage Capacity: 26 ~ 120pcs
Diameter of Warp Beam or Batched Roll: φ500-φ1250
Width of Warp Beam or Batched Roll: Model 1500 ~ Model 3900
For each Store, we all installed a new control device which adopted film paneloperating and liquid crystal screen. Furthermore, we also adopted technology of single microprocessor to work with the cyc[oida[gear speed reducer, so that it can automatic continuous running in both positive and negative direction or manual operating mode, then the operation system wi[[select the shortest way and therefore automatic stop and starting up the beam stacker automatically.
On request of the customers it can be selective fitted with a computer contro system. When it's on the upper-beam state, this system can be inputted the detailed information of the yarn related to the each beam saved into the computer When it's on the lower-beam state, it is understand fully at glance. In addition, the system wi[[be automated running as long as you dick the computer for any specification the customer's required. This computer control, system al.so can connect to other computers to grasp of storaging data between each department, in order to achieve: production schedul.ing, pl.anned circul.ating, to strengthen modern management mode and improved work efficiency.
Mode of Upper-beam: According to the request, you can select Hydraulic Platforms or Hydraulic Tip Transport Cart.
Storage capacity | Type of warp beam | Overall Size(mm) | Layer | ||
Length | Width | Height | |||
30 | Φ800×Model 1900 (L,=2200) | 930 | 3000 | 4300 | 4 |
40 | 12000 | ||||
50 | 15000 | ||||
60 | 18000 | ||||
70 | 21000 | ||||
80 | 24000 | ||||
100 | 30000 |
Storage capacity | Type of warp beam | Overall Size(mm) | Layer | ||
Length | Width | Height | |||
30 | Φ1000×Model 1900 (L,=2200) | 10650 | 3200 | 5200 | 4 |
40 | 14000 | ||||
50 | 17350 | ||||
60 | 20700 | ||||
70 | 24050 | ||||
80 | 27400 | ||||
100 | 34100 |
Storage capacity | Type of warp beam | Overall Size(mm) | Layer | ||
Length | Width | Height | |||
70 | Φ800×Model 1900 (L,=2200) | 14300 | 3000 | 6500 | 6 |
80 | 16200 | ||||
100 | 20000 |